Ideally, the winding should be positioned parallel to the winding flange, meeting an orthogonality condition. It is necessary to adjust the winding width to the number of turns per layer of the winding. For non-circular shaped coil cross-sectional areas, it…
About NEMA MW 1000 MW 1000 is approved as an American National Standard through the NEMA MW 1000 Consensus Body accredited by the American National Standards Institute (ANSI). The Consensus Body consists of magnet wire participants including wire manufacturers, end…
Specifications for particular types of winding wires – Part 0-2: General requirements – Enamelled rectangular copper wire The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between…
Japanese Industrial Standards (JIS) (日本産業規格, Nihon Sangyō Kikaku, formerly 日本工業規格 Nihon Kōgyō Kikaku until June 30, 2019) are the standards used for industrial activities in Japan, coordinated by the Japanese Industrial Standards Committee (JISC) and published by the Japanese Standards…
GB6109 Q(ZY/XY) high temperature enameled wire is Composite enameled wire of polyimide and polyamideimide, with better withstand voltage performance. Model Nominal diameter Conductor deviation Max. Outer diameter Min. paint film Q(ZY/XY)-1/200 0.050 —— 0.060 —— Q(ZY/XY)-1/200 0.053 —— 0.064 —— Q(ZY/XY)-1/200 0.056…
UL, LLC is a global safety certification company headquartered in Northbrook, Illinois. It maintains offices in 46 countries. Established in 1894 as the Underwriters’ Electrical Bureau (a bureau of the National Board of Fire Underwriters), it was known throughout the…
RoHS stands for Restriction of Hazardous Substances, and impacts the entire electronics industry and many electrical products as well. The original RoHS, also known as Directive 2002/95/EC, originated in the European Union in 2002 and restricts the use of six…
The ISO 9000 family of quality management systems (QMS) is a set of standards that helps organizations ensure they meet customer and other stakeholder needs within statutory and regulatory requirements related to a product or service. ISO 9000 deals with…
Polyvinylformal Enamels is composed mainly of polyvinylformal, for wires in oil-containing transformers. Thermal Index: 120 Chemical Basis: Polyvinylformal, 2-Component This is a polyvinylformal enamel for general purpose, made of high performance polyvinylformal resins and other resins. It’s intended for rectangular…
Polyamideimide Enamels are widely used class 220 enamels, applied mostly as overcoat to produce dual coating wires to improve the overall properties, suitable for hermetic motors and Freon-resistant wires. Some of them are also used as single coating. Possible to…